Melting Route

Airmelted

Product Description

BÖHLER K100 is a 12% ledeburitic chromium steel and corresponds to material number 1.2080 (X210Cr12). This commonly used tool steel is highly resistant to abrasive wear. Compared to modern cold work tool steels, BÖHLER K100 has the advantage of simple heat treatment with lower hardening temperatures and single tempering. However, this characteristic tempering behaviour limits the use of advanced coatings.

Property Features

  • Wear Resistance: good

Technical Specifications

Material Numbers


1.2080 ~T30403 X210Cr12 ~D3 ~SKD1


Standards


4957

Chemical Composition

Chemical composition (average %)
2.00 0.25 0.35 11.50

Available product shapes

Information on Long Products ) Presented data refer exclusivly to long products. Please observe the detailed explanations at the end of the data sheet (pdf).

  • Long Products
  • Plates

Contacts

BÖHLER Worldwide

Please choose your market and find your local contact.

Worldwide

Please use a browser that is not outdated.

You are using an outdated web browser.

Errors may occur when using the website.