BÖHLER K455 corresponds approximately to the material 1.2550 (~60WCrV7, ~S1) in terms of the alloy concept. This classic matrix steel is characterized by high toughness, good machinability and polishability. BÖHLER K455 offers the advantage of simple heat treatment with low hardening temperatures and single tempering. BÖHLER K455 is widely used in the field of punching and cutting tools as well as in the field of embossing tools.
| 圧縮強度 | 靭性 | 耐引掻摩耗性 |
|---|---|---|
|
|
|
|
| SEL | EN | EN | AISI |
|---|---|---|---|
| ~1.2550 | ~60WCrV7 | ~60WCrV8 | ~S1 |
| C | Si | Mn | Cr | V | W | |
|---|---|---|---|---|---|---|
| 0.63 | 0.60 | 0.30 | 1.10 | 0.18 | 2.00 |
Information on 長尺材 ) Presented data refer exclusivly to long products. Please observe the detailed explanations at the end of the data sheet (pdf).
